Earn 18 REC points with this purchase!
The Knife Shield delivers rust prevention and cleaning in one formula. Creates protective film against corrosion and prevents rust and patina formation. Removes tape gunk and grease better than toxic solvents. Works on all metals—steels, titanium, brass, copper, and designer laminates. Vapor-phase protection safeguards entire collections in storage. 100% food-safe and non-toxic. The complete corrosion protection solution.
KPL Knife Pivot Lube
Camellia Oil Tsubaki (Camellia Oleifera) delivers premium protection for high-end carbon steel kitchen knives, swords, and cast iron cookware. Omega-9 natural oil, virgin-pressed from camellia seeds,...
KPL Knife Pivot Lube
KPL (Knife Pivot Lube) Original Knife Oil The KPL keeps dirt, metal particles, and grit in suspension so they don't cause grinding and premature wear. Actually cleans your pivot as you use it...
KPL Knife Pivot Lube
KPL Heavy Lubricant The KPL Heavy delivers higher-viscosity lubrication engineered specifically for knife detents and detent tracks. Thixotropic/shear thinning formula stays gel-like at rest, then...
Aegis Solutions
Aegis Solutions EDCi 4 Oz Knife Care is an Every Day Corrosion Inhibitor designed to protect your everyday carry from the elements by preventing rust. Aegis EDCi is...
KPL Knife Pivot Lube
KPL Ultra-Lite Lubricant The KPL Ultra-Lite represents over a year of research and testing to complete KPL's lubricant lineup. 5 WT fully-synthetic oil designed specifically for bearing pivots,...
First, it was hard to get the pump to work. I had to clean it by running water thru it. This is after shaking it vigorously, which I have a feeling you will always have to do because it was thick before I shook it. The product claims to do a lot, which is good. But the things I didn't like were: 1. It wasn't streak free 2. It seemed to have a "sticky" feeling to it. So what do i mean by that? You know the microfiber cloth you get with your REC orders (which is awesome). there is a rough side and the polish side. I was using this on a tenacious (just a plain 8CR, non coated, just to see how I liked it. So i sprayed it on, let it sit for 20seconds, then started to wipe it off. It was DIFFICULT to wipe it off with that microfiber towel. Like, the towel didn't want to glide over the knife. Or you have to use a very light touch. Either way, as in the subject, I didn't dig it. To make sure I wasn't nuts, i wiped down the blade with alcohol, and redid it with my usual go to: tuff glide. With that you do have to let it dry for a while, and you don't really have to wipe it down, but I do a little bit and it was slippery as butter. Anyway, this was just my experience, We all love us some KPL. I might try it again on a DLC to see how it does,
I did try it out yet I nned to try it out
